Cushion Crease Rubber Cutting Machine

Cutting MachineUser Manual

Product Introduction:

This system is a dedicated motion control system, which is independently developed by our company, applicable to all kinds of materials fixed-length cutting.

  1. The microcomputer cutting machine is widely used in electronics industry, auto industry, electrical appliances, motors, toys, transformers and other industries, which can automatically do fixed-length cutting for Tube like heat shrinkable tube and silicone tube etc., Belt like elastic belt and velcro belts etc., Sheet like PVC film and plastic sheet etc., Paper like insulating paper and barley paper etc., Membrane like reflective film and plastic film etc., Wire class like cable and wire etc., Metal sheet like copper foil and nickel sheet etc. ,which is your best choice.
  2. High-speed stepper motor can precisely control the length of the material belt and the speed is adjustable.
  3. With cutter blade protection, the total number& batch setting; batch to pause time are adjustable;
  4. With a variety of manual operation, easy debugging;
  5. LCD large-screen visual display: simple and convenient operation

System Composition :

Components:

  1. main control board keypad board
  2. 240X64 LCD
  3. stepper drive
  4. stepper motor
  5. geared motor and reducer

Operating Instructions :

keys functions :

  1. Forward → :
    Press this button the roller will run clockwise to send the material belt forward
  2. Backward ← :
    Press this button the roller will run counterclockwise, the material belt will move backwards
  3. Clear/Cutter blade CLR :
    In standby mode, press this button the cutter blade will move up or down, when feeding material elt, if the cutter blade’ location is low, press CLR button to make it move up is ok. if the material elt get stuck, press CLR key to clear it. If on the setting screen, press CLR key to clear the error value.
  4. Length LEN :
    Press LEN button firstly, press CLR key secondly, and then press the number keys to set the value of the length that you want to cut (other parameter settings are similar)
  5. Speed SPD:
    The SPD button here represent the feeding speed, cutter blade speed can be set by pressing the “FUN” key + “2”key. press this SPD button, then press the number keys to set the speed value between 00 to 99, the higher the value, the faster the speed, on the contrary, slower speed。
  6. Batch UNIT :
    Press this button firstly, press the CLR key secondly, then press the number keys to set the value of batch(UNIT) between 0 to 999, if set the batch(UNIT) value as 0, it will not suspend
  7. Totals TOL:
    Press this button firstly, press the CLR key secondly, then press the number keys to set the totals。
  8. Cutter Blade CUT :
    Press this button firstly, press the CLR key secondly, then press the number keys to set the cut times of cutter blade, which is usually set as 1. Note: Each time after setting figures, you must press the “SET” button again to save it. If you want to return to the main screen, press the “STOP” button is ok .
  9. Clear Memory CMP:
    Press this button you can clear the display of cut times
  10. Run RUN:
    Press this button the machine will start work.
  11. Function FUN :
    Set several special parameters

 

One stop solution provider for die cutting and die making. Passed CE & SGS

PRODUCT GALLERY