Pneumatic Nick Grinder

Model:Pneumatic Nick Grinder(with Taiwan motor)

Product Parameter

Average Air Consumption 4CFM
Maximum Torque Adjustable
No-Load Speed 35000RPM
Color Yellow/Blue/Green/Red
Automatic Grade Semi-Automatic
Packing 1set/box
Net Weight 0.8kg
Usage Die cutting Nick Grinding
Dimension 180*60*68mm
Payment Terms Trade Assurance Order  T/T Western Union Money Gram
Inlet pipe diameter 8*5mm
Working pressure Mpa 0.6-0.8
Air pipe length 1.2+6M
Delivery tools 4pcs
Free grinding wheel per set 10pcs
Warranty service 6 months
Daily Maintenance Pls use 2-3 drop machine oil to the air inlet every day before use
Materials Aluminium body & stainless steel protection shield Transparent noiseless pipe

Advantage:

1.Versatile pneumatic powered nicking grinder produce clean, perpendicular nicks at consistent&adjustable depths.
2.Operating with less noise and vibration
3.Steady position of the devices on die-boards due to 4 removable pins below the base.
4.Nicks width from 0.2mm to 2.0mm by using different grinding distance thickness.

Thickness: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.2mm,1.5mm,2.0mm,

Manual Instructions:

1.Check the air source, air pressure stable or not
2.Check the machine screws etc.
3.Change the grinding wheel according to needs, adjust the depth valve(If not use high precision position, pls lock the depth valve to the rock bottom position, which will do the nick grinding jobs according to the pressure power)
4.Wear gloves, protective glass, masks
5.Connect to air source( suggest to hang up the air hose)
6.Pls drop 3 drops pneumatic oil to the air inlet, plug in the air hose. Rotate to right to open the grinder. Then slowly idle for a few seconds, rotate to left to close
7.Put the wooden die cutting board smoothly on the table(suggest not to use sponge rubber before nick grinding, as resistance increases)
8.Rotate to right to open the grinder, increase the speed. Use thumb and first finger to hold the machine when the rotation speed gets stable. Then put the machine in the front side of the steel rules, move it to the grinding position(use wheels to adjust the position) and gently press the machine to start nicking. Move stably in turn. Pay attention that must gently press and handle
9.After finish the nicking job, rotate to left to close. Unplug the air hose and use 3 drops pneumatic oil to the air inlet, then plug to the air hose and open the grinder to idling for a few seconds. After that close the air source, clean the machine body and keep in proper position

PRODUCT GALLERY